Flower preserving has become hugely popular amongst many epoxy users , we have tailored this formula to meet what we believe to be so so important when clear casting , longevity , colour and air release are super important to achieving great long term results and this formula meets all these necessities. Flower pox can also be used for shallow epoxy pours that don’t contain flowers .
Flower Pox is a specialised formula for flower casting and shallow castings . Flower pox has optical enhancing properties for clear casting , it also has tailored UV protection for longevity when casting with flowers or any shallow clear castings . Its uniquely different UV protection and aesthetically pleasing colour makes this the perfect epoxy for preserving . Flowers have been extensively tested to withstand any discolouring as well as having a lower exothermic reaction that does not react with flowers .
This epoxy should not be used in greater depths than 25-30mm (conditions dependent) It can be poured in layers between 5-25/30mm deep . Please note the deeper you go the cooler you will need your area <20 degrees and <75% humidity .Pours under 20mm -20-23 degrees
Flower Pox has a thicker viscosity , warming part A in warm water before pouring will lower the viscosity of the epoxy allowing for greater air release (Please note this can shorten your pot life ) . Please note pours over 20mm will require this to achieve maximum air release . DO NOT MIX HEAVILY as you will create more air . This epoxy has a long working time ( 60 mins ) allowing for careful mixing .
RE LAYER TIME - 12 HOURS ( VOLUME/TEMP DEPENDENT )
TOP COAT OR SAND&POLISH - 24-48 HOURS POST FINAL LAYER (VOLUME/TEMP DEPENDENT)
TOUCH DRY - 18 -24 HOURS (VOLUME/TEMP DEPENDENT)
FULL CURE - 48-72 HOURS ( VOLUME/TEMP DEPENDENT)
Refer to SDS and TDS for more information
Vacuum chambers can be used if preferred .